|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
MICROWAVE CORPORATION v01.0301 HMC393MS8G GaAs MMIC DPDT DIVERSITY SWITCH, 5.0 - 6.0 GHz Features Low Insertion Loss: 1.2 dB @ 5.5 GHz High IP3: 49 dBm Positive Control: 0/+5V Ultra Small MSOP8G Package: 14.8 mm2 Typical Applications This switch is ideal for use as a DPDT Diversity Switch for 5.0 - 6.0 GHz applications: * HiperLAN * UNII Functional Diagram General Description The HMC393MS8G is a low cost C-band DPDT switch that operates between 5.0 and 6.0 GHz. This switch can operate as an integrated antenna diversity and transmit/receive switch for the HyperLAN and UNII radio platforms. The design provides 20 dB of isolation between antennas and between Tx and Rx ports. The switch features 1.2 dB insertion loss and high power handling capability. Switch state is controlled using four CMOS level control voltage lines. 14 SWITCHES - SMT Electrical Specifications, TA = +25 C, Vctl = 0/+5 Vdc, 50 Ohm System Parameter Insertion Loss Isolation Return Loss (On State, Any Port) Input Power for 0.1 dB Compression Input Third Order Intercept (Two-Tone Input Power = +22 dBm Each Tone) Switching Characteristics tRISE / tFALL (10/90% RF) tON / tOFF (50% CTL to 10/90% RF) Frequency 5.0 - 6.0 GHz 5.0 - 6.0 GHz 5.0 - 6.0 GHz 5.0 - 6.0 GHz 5.0 - 6.0 GHz 5.0 - 6.0 GHz 11 22 ns ns 15 13 27 45 Min. Typ. 1.2 20 20 30 49 Max. 2.0 Units dB dB dB dBm dBm 14 - 218 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com MICROWAVE CORPORATION v01.0301 HMC393MS8G GaAs MMIC DPDT DIVERSITY SWITCH, 5.0 - 6.0 GHz GaAs MMIC Insertion Loss 0 -0.5 SUB-HARMONICALLY Insertion Loss vs. Temperature GHz PUMPED MIXER 17 - 25 0 -0.5 +25C +85C -40C INSERTION LOSS (dB) -1 -1.5 -2 -2.5 -3 4 4.5 5 5.5 6 6.5 7 FREQUENCY (GHz) ANT1-Tx State 1 ANT1-Rx State 2 ANT2-Tx State 3 ANT2-Rx State 4 INSERTION LOSS (dB) -1 -1.5 -2 -2.5 -3 4 4.5 5 5.5 6 6.5 7 FREQUENCY (GHz) Isolation, Tx & Rx 0 -5 -10 State 1 State 2 State 3 State 4 Isolation, ANT1 & ANT2 0 -5 -10 State 1 State 2 State 3 State 4 14 SWITCHES - SMT 14 - 219 ISOLATION (dB) -15 -20 -25 -30 -35 -40 4 4.5 5 5.5 6 6.5 7 FREQUENCY (GHz) ISOLATION (dB) -15 -20 -25 -30 -35 -40 4 4.5 5 5.5 6 6.5 7 FREQUENCY (GHz) Return Loss, ANT1 & ANT2 0 -5 ANT1 State 1 ANT1 State 2 ANT2 State 3 ANT2 State 4 Return Loss, Tx & Rx 0 -5 Tx State 1 Tx State 3 Rx State 2 Rx State 4 RETURN LOSS (dB) -15 -20 -25 -30 -35 4 4.5 5 5.5 6 6.5 7 FREQUENCY (GHz) RETURN LOSS (dB) -10 -10 -15 -20 -25 -30 -35 4 4.5 5 5.5 6 6.5 7 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com MICROWAVE CORPORATION v01.0301 HMC393MS8G GaAs MMIC DPDT DIVERSITY SWITCH, 5.0 - 6.0 GHz Isolation, ANT1 / ANT2 - Tx / Rx 0 -5 ANT1-Tx State 2 ANT1-Rx State 1 ANT2-Tx State 1 ANT2-Rx State 2 Input 0.1 dB Compression Point 35 34 +25C +85C -40C 0.1dB COMPRESSION (dBm) 6.5 7 33 32 31 30 29 28 27 26 ISOLATION (dB) -10 -15 -20 -25 -30 4 4.5 5 5.5 6 25 4.5 5 5.5 FREQUENCY (GHz) 6 6.5 FREQUENCY (GHz) Input IP3 * 14 SWITCHES - SMT IP3 (dBm) 55 54 53 52 51 50 49 48 47 46 45 4.5 5 5.5 FREQUENCY (GHz) 6 6.5 Control Voltages State Low High Bias Condition 0 to +0.5 Vdc @ 10 uA Typ. +5.0 to +6.5 Vdc @ 10 uA Typ. Truth Table Path ANT1 - Tx ANT1 - Rx ANT2 - Tx ANT2 - Rx V1 High High Low Low V2 Low Low High High V3 High Low High Low V4 Low High Low High State 1 2 3 4 * Two-tone input power = +22 dBm each tone, 1 MHz spacing. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 14 - 220 MICROWAVE CORPORATION v01.0301 HMC393MS8G GaAs MMIC DPDT DIVERSITY SWITCH, 5.0 - 6.0 GHz Absolute Maximum Ratings RF Input Power Vctl = 0/+5V Control Voltage Range (V1, V2, V3, V4) Storage Temperature Operating Temperature +33 dBm -0.5 to +7.5 Vdc -65 to +150 C -40 to +85 C Caution: Do not "Hot Switch" power levels greater than +23 dBm (Vctl = 0/+5 Vdc). DC blocking capacitors are required at ports ANT1, ANT2, Tx, Rx. Choose value for lowest frequency of operation. Outline Drawing 14 SWITCHES - SMT 14 - 221 NOTES: 1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED PLASTIC SILICA AND SILICON IMPREGNATED. 2. LEADFRAME MATERIAL: COPPER ALLOY 3. LEADFRAME PLATING: Sn/Pb SOLDER 4. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 7. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com MICROWAVE CORPORATION v01.0301 HMC393MS8G GaAs MMIC DPDT DIVERSITY SWITCH, 5.0 - 6.0 GHz Evaluation PCB 14 *R1 & R2 = 100 Ohm. SWITCHES - SMT These optional resistors will provide more RF path to control circuit isolation. List of Material Item J1 - J4 J5 - J8 C1 - C4 R1 - R2 U1 PCB* Description PC Mount SMA Connector DC Pin Chip Capacitor, 0402 Pkg. Choose value for lowest frequency of operation. 100 pF is provided on PCB. 100 Ohm Resistor, 0402 Pkg. HMC393MS8G DPDT Diversity Switch 103037 Evaluation PCB 1.5"x1.5" The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown above. A sufficient number of VIA holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown above is available from Hittite upon request. * Circuit Board Material: Rogers 4350 14 - 222 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com MICROWAVE CORPORATION v01.0301 HMC393MS8G GaAs MMIC DPDT DIVERSITY SWITCH, 5.0 - 6.0 GHz Notes: 14 SWITCHES - SMT For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 14 - 223 |
Price & Availability of HMC393MS8G |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |